Vehicle security alarm - if equipped

Rearming Of The System

If something triggers the alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn the horn off after 29 seconds, 5 seconds between cycles, up to 8 cycles if the trigger remains active and then the Vehicle Security Alarm will rearm itself.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:

1.  Make sure the vehicles ignition is cycled to the "OFF" position (refer to Starting Procedures in Starting And Operating for further information).

•  For vehicles equipped with Keyless Enter-N-Go - Passive Entry, make sure the vehicles keyless ignition system is OFF.
•  For vehicles not equipped with Keyless Enter-N-Go - Passive Entry, make sure the vehicle ignition system is OFF, and the key is physically removed from the ignition.

2.  Perform one of the following methods to lock the vehicle:

•  Push LOCK button on the interior power door lock switch with the driver and/or passenger door open.
• Push the LOCK button on the exterior Passive Entry Door Handle with a valid key fob available in the same exterior zone (refer to Keyless Enter- N-Go-Passive Entry in Things To Know Before Starting Your Vehicle for further information).
•  Push the LOCK button on the key fob.

3.  If any doors are open, close them.

 To Disarm The System

The Vehicle Security Alarm can be disarmed using any of the following methods:

•  Push the UNLOCK button on the key fob.
•  Grasp the Passive Entry Unlock Door Handle (if equipped, refer to Keyless Enter-N-Go - Passive Entry in Things To Know Before Starting Your Vehicle for further information).
•  Cycle the vehicle ignition system out of the OFF position.
•  For vehicles equipped with Keyless Enter-N-Go - Passive Entry, push the keyless ignition button (requires at least one valid key fob in the vehicle).
•  For vehicles not equipped with Keyless Enter-N-Go - Passive Entry, insert a valid key into the ignition and turn the key to the ON position.

NOTE:

•  The driver's door key cylinder and the liftgate button on the key fob cannot arm or disarm the Vehicle Security Alarm.
•  The Vehicle Security Alarm remains armed during power liftgate entry. Pushing the liftgate button will not disarm the Vehicle Security Alarm. If someone enters the vehicle through the liftgate and opens any door, the alarm will sound.
•  When the Vehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.

The Vehicle Security Alarm is designed to protect your vehicle. However, you can create conditions where the system will give you a false alarm. If one of the previously described arming sequences has occurred, the Vehicle Security Alarm will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the Vehicle Security Alarm.

If the Vehicle Security Alarm is armed and the battery becomes disconnected, the Vehicle Security Alarm will remain armed when the battery is reconnected; the exterior lights will flash, and the horn will sound. If this occurs, disarm the Vehicle Security Alarm.

 Security System Manual Override

The Vehicle Security Alarm will not arm if you lock the doors using the manual door lock plunger.

 Tamper Alert

If something has triggered the Vehicle Security Alarm in your absence, the horn will sound three times and the exterior lights will blink three times when you disarm the Vehicle Security Alarm. Check the vehicle for tampering.