Ambient temperature sensor
REMOVAL
(1) Disconnect and isolate the battery negative cable.
(2) Locate the ambient temperature sensor, on the right side of the radiator yoke behind the grille (Fig.
10).
Fig. 10 Ambient Temperature Sensor Remove/Install
1 - YOKE
2 - CONNECTOR
3 - SCREW
4 - SENSOR
(3) Disconnect the wire harness connector from the ambient temperature sensor connector receptacle.
(4) Remove the one screw that secures the ambient temperature sensor bracket to the radiator yoke.
(5) Remove the ambient temperature sensor from the radiator yoke
INSTALLATION
(1) Position the ambient temperature sensor onto the radiator yoke.
(2) Install and tighten the one screw that secures the ambient temperature sensor bracket to the radiator yoke. Tighten the screw to 5.6 N*m (50 in. lbs.).
(3) Reconnect the wire harness connector to the ambient temperature sensor connector receptacle.
(4) Reconnect the battery negative cable.
Special tools
Overhead console systems
Degaussing Tool 6029
Dodge Durango (DN) 1998-2003 Service Manual
- Lubrication and Maintenance
- Suspension
- Differential and Driveline
- Brakes
- Cooling System
- Battery
- Starting Systems
- Charging System
- Ignition System
- Instrument Panel Systems
- Audio Systems
- Horn Systems
- Speed Control System
- Turn Signal and Hazard Warning Systems
- Wiper and Washer Systems
- Lamps
- Passive Restraint Systems
- Electrically Heated Systems
- Power Distribution System
- Power Lock Systems
- Vehicle Theft/Security Systems
- Power Seat System
- Power Window Systems
- Power Mirror Systems
- Chime/Buzzer Warning Systems
- Overhead Console Systems
- Engine
- Exhaust System
- Frame and Bumpers
- Fuel System
- Steering
- Transmission and Transfer Case
- Tires and Wheels
- Body
- Heating and Air Conditioning
- Emission Control Systems
- Introduction
Categories
